MIT HAND WORN METAL DETECTOR

$200.00

MIT HAND WORN METAL DETECTOR

Compare
SKU: AD MIT Category: Tag:

Description

IDEAL FOR HAND SEARCH PAT-DOWN APPLICATIONS. GIVES THE USER A “SIXTH SENSE” WITH SENSE OF TOUCH AND METAL DETECTION. NO WIRES , NO ADJUSTMENTS – JUST SWITCH ON AND GO

TECHNICAL SPECIFICATIONS

Construction: Neoprene – Velcro
Dimensions: Medium or Large, standard generic size.
Operating Frequency: 20kHz
Weight: 5.2oz (149g) including battery.
Sensitivity: Target Size 0.5 grams.
Controls: Fully Automatic – (No Sensitivity Adjustment Required – Factory pre-set)
Operating Temperature: -20C to +65C
Storage Temperature: -30C to +80C
Humidity: 98%
Ingress Progression: IP64 (IEC 529) (Waterproofing & environmental protection)
Operating Time: Up to 3 months with normal use. 48 hours continuous at +25C (alkaline battery) 40 hours continuous at +25C (single rechargeable battery charge)
Instant response to all metals.
Battery: Standard 9 volt block battery, MN 1604, 6LR61 or equivalent alkaline disposable or rechargeable. When the battery is exhausted a continuous tactile alarm signal is produced Battery inserted inside water resistant neoprene & Velcro pocket. No visible wires.

Tested and approved to EEC EN5008-1 Table 1. EN50082-1 Table 1:1.1 Radiated emissions (“CE” mark) Medically tested and approved – No risk to persons with pacemakers. Non- interference to magnetic recorded material –

Alarm indication by means of vibrating tactile indicator.

Detection speed: Ultra fast; ‘Detect – Alarm – Reset’ ready for another target – 0.1 second. Pinpoint target accuracy from APT search head at the base of index finger, concealed inside water resistant neoprene fabric lining. 
Mass proportion discrimination alarm indication: At constant sweep speed: short digital pulse = small target Long pulse = large target.

Minimum pressure push button latching switch On/Off switch operation, inside water resistant neoprene fabric layer.

FREE Ground Shipping in USA Only

SKU : AD MIT

Additional information

Weight 0.49 lbs